Special Products
Simself Tape

SimSelf Tape is a bitumen-based water insulation tape. Its one surface is covered with Aluminum or Colored Minerals and the other surface consists of a removable film. SimSelf Tape is not affected negatively by sunshine thanks to its natural aluminum folio or Natural mineral coating. It can be applied also on inclined and curvilinear surfaces thanks to its flexibility.

SimSelf Tape offers practical solutions for many details with its waterproof characteristic and self-adhesion ability. It is produced in 10-15-20-30-60 cm wide and 10m long rolls.

SimSelf Tape becomes ready to be adhered when the removable film on one of its surfaces is removed. Moreover, the application area needs to be clean and dry for ensuring good adhesion. However, a Standard bitumen plaster must be applied on the surface before applying SimSelf Tape on concrete surfaces and SimSelf Membrane must be adhered onto the dry surface after this plaster layer dries.


It is manufactured from self-adhesive, Special modified bitumen with SBS. It is 1.5 mm thick.

COLORS: Natural Aluminum color is Red and Green.

Specifications Unit Folio Coated
Simself Tape
Thickness mm 1,5
Weight Kg/m2 1,7
Width cm 10-15-20-30-60
Length m 10
Upper Coating   Aluminum Folio
Lower Coating   Removable Film
Content of the Box Package


It contains Fiberglass and Polyester Felt Carrier

COLORS: Red - Black and Green - Black

Specifications Unit Folio Coated
Simself Tape
Thickness mm 1,5
Weight Kg/m2 1,7
Width cm 10-15-20-30-60
Length m 10
Upper Coating   Aluminum Folio
Lower Coating   Removable Film
Content of the Box Package 6m2